Removing The Motherboard - Siemens SIMATIC Rack PC 840 V2 Operating Instructions Manual

11.1.5

Removing the motherboard

Preparation
1. Disconnect the device from mains and unplug all cables.
2. Open the device.
Removing the motherboard
How to remove the motherboard
1. Remove all modules from their slots.
2. Removing the bus board
3. Disconnect all cables off the motherboard, noting down their assignment while doing so.
4. Remove the four screws and three hexagonal bolts from the motherboard.
5.
The motherboard is supplied as spare part without processor, memory modules and bus
board.
SIMATIC Rack PC 840 V2
Operating Instructions, Edition 05/2006, A5E00248055-04
Remove the eight hexagonal bolts at the interfaces.
11.1 Removing and installing hardware components
Maintenance and service
11-7