Vlan Id - Dell PowerEdge C6145 Manual
Baseboard management controller
Hide thumbs
Also See for PowerEdge C6145:
- Hardware owner's manual (250 pages) ,
- Getting started (153 pages) ,
- Using instructions (76 pages)
Table of Contents
Advertisement
Set SSH/Telnet SOL Redirect enable:
1
Reserved Extended Configuration
ipmitool raw 0x30 0x01
Response: 0x02 (Reservation ID)
2
Enable SSH/Telnet SOL redirect.
ipmitool raw 0x30 0x03 0x02 0x03 0x02 0x00 0x00 0x00 0x01 0x01
(set 1 to enable)
Response: 0x01
VLAN ID
User can use LAN configuration command parameter 14H to Set or Get VLAN
ID. More VLAN information, please refer to "IPMI SPEC v2.0 errata revision
4".
Commands
Set LAN Configuration
Parameters
(Note: Parameter 9 and 25 are not
supported.)
Get LAN Configuration
Parameters
(Note: Parameter 9 and 25 are not
)
supported.
LAN configuration Parameter 14H:
Parameter
802.1q VLAN ID
(12-bit)
NetFn
Transport
Transport
#
Parameter Data
14H
data 1
[7:0] - Least significant 8-bits of the VLAN
ID. 00h if VLAN ID not used.
data 2
[7] - VLAN ID enable.
0b = disabled, 1b = enabled. If enabled, the
BMC will only accept packets for this
channel if they have 802.1q fields and their
CMD
O/M
Supported
01h
M
Yes
02h
M
Yes
Appendix
|
73
Advertisement
Table of Contents
