Installation Steps, Overview - Fujitsu PRIMERGY RX1330 M3 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that all necessary manuals (see
page 12) are available; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. Install these in the server as described in the supplied
documentation.
Ê Install the server in the rack (see section
in/from the rack" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 50
page 55.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
RX1330 M3
"Important information" on page
"Unpacking the server" on page
48).
and "Notes on connecting/disconnecting cables" on
52).
"Controls and indicators" on page
Operating Manual
33.
"Documentation overview" on
"Installing/removing the server
"Connecting devices to
"Connecting the server to the
57).
48).
31