Fujitsu PRIMERGY RX1330 M3 Operating Manual page 61

Pos. Label
6
iRMC-related status signals
Global error
ID indicator
indicator
blue flashing off
blue flashing orange flashing
RX1330 M3
Indicator Status
green on
AC
connected
indicator
off
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
I
Operating Manual
Starting up and operation
Description
– The server is switched off and
connected to the mains
(standby mode).
– The server has been switched
on but Power Cycle Delay
settings delay it from turning
on for a specified time.
I
After connecting the server
to the mains, it will take
about 60 seconds until the
server will enter standby
mode and can be switched
on.
– The server is switched off and
not connected to the mains.
– The server is switched on and
operating normally.
For further information on the
emergency flash of the iRMC
firmware, refer to the "FUJITSU
Server PRIMERGY RX1330 M3
Upgrade and Maintenance
Manual".
61