Quick-Start Demo - Titan 3000XD Owner's Manual

QUICK-START DEMONSTRATION
I. Supplies Needed
• A Nail
• A Pull-Tab from a beverage can
II. Position the Detector
a. Place the detector on a
table, with the search coil
hanging over the edge.
(or better, have a friend
hold the detector, with
the coil off the ground)
b. Keep the search coil away
from walls, floors, and
metal objects.
c. Remove watches, rings and other jewelry or metal objects
from hands and wrists.
d. Turn off appliances or lights that cause electromagnetic interference.
e. Pivot search coil back toward the detector body.
III. Power Up
Press the ON touch pad.
IV. Wave each Object over the Search Coil
a. Notice a different tone for each object.
Base Tone:
Low Tone:
Medium Tone:
High Tone:
b. Motion is required. Objects must be
in motion over the search coil to be
detected.
V. Press the MODE touch pad
The detector will beep twice and an "R"
will appear under the iron indicator.
Quick-Start Demo continued on next page
6
Nail
Pull-Tab
Zinc Penny
Quarter
• A Quarter
• A Zinc Penny (dated after 1982)