Quick-Start Demo - Titan 1000XD Owner's Manual

QUICK-START DEMONSTRATION
I. Supplies Needed
• A Nail
• A Pull-Tab from a beverage can
II. Position the Detector
a. Place the detector on a
table, with the search coil
hanging over the edge. (or
better, have a friend hold
the detector, with the coil
off the ground)
b. Keep the search coil away
from walls, floors, and
metal objects.
c. Remove watches, rings and other jewelry or metal objects from hands
and wrists.
d. Turn off appliances or lights that cause electromagnetic interference.
e. Pivot search coil back toward the
detector body.
III. Power Up
Press the ON touchpad.
The detector will beep twice and the
full sensitivity setting will be
indicated on the left of the display.
IV. Wave each Object over the Search Coil
a. Notice a different tone for each object.
Low Tone:
Medium Tone: Pull-tab & Zinc Penny
High Tone:
b. Motion is required. Objects must be in motion over the search coil to
be detected.
V. Press the MODE touchpad(*)
The detector will beep twice and
the sensitivity setting will flash on
the left side of the display.
Quick-Start Demo continued on next page
6
• A Quarter
• A Zinc Penny (dated after 1982)
Nail
Quarter
TARGET TARGET
DEPTH ID
SILVER/
COINS
SURFACE
GOLD/
COINS/
2"
PULLTABS
SM GOLD/
4"
IRON/
TRASH
6"
OFF
MODE
TARGET TARGET
DEPTH ID
SILVER/
COINS
SURFACE
GOLD/
COINS/
2"
PULLTABS
SM GOLD/
4"
IRON/
TRASH
6"
OFF
MODE
ON
ON