Troubleshooting - Titan 3000XD Owner's Manual

TROUBLESHOOTING

TROUBLE SHOOTING GUIDE
SYMPTOM
Detector chatters
or beeps erratically
False high-tone
signals
LCD does not lock
on to one target ID
or detector emits
multiple tones
No power, no
sounds
22
CAUSE
• Using detector
indoors
• Using detector near
power lines
• Using 2 detectors in
close proximity
• Highly oxidized
buried object
• Environmental
electromagnetic
interference
• Over-adjusted
ground balance
knob
• Multiple targets
present
• Highly oxidized
target
• Sensitivity set
too high
• Dead batteries
• Poor battery
contact
• Cord not connected
securely
SOLUTION
• Use detector
outdoors only
• Move away
from power lines
• Keep 2 detectors
at least 20' apart
• Only dig up
repeatable
signals
• Reduce sensitivity
until erratic
signals cease
• Move GB knob
counter clockwise
• Move coil slowly
at different angles
• Reduce sensitivity
• Replace batteries
• Push batteries in
tighter
• Insert paper spacers
(see page 5)
• Check connections