In The Field Techniques - Titan 3000XD Owner's Manual

IN THE FIELD TECHNIQUES

PINPOINTING
Accurate pinpointing takes practice
and is best accomplished by "X-ing"
the target area.
1. Once a buried target is indicated by
a good tone response,
sweeping the coil over the target
in a narrowing
tern.
2. Take visual note of the place on the
ground where the "beep" sounds.
3. Stop the coil directly over this spot
on the ground.
4. Now move the coil straight
ward and straight back towards
you a couple of times.
5. Again make visual note of the spot
on the ground at which the "beep"
sounds.
6. If needed, "X" the target at
different angles to "zero in" on the
exact spot on the ground at which
the "beep" sounds.
NOTE: This modern Metal Detector is referred to as a Motion Detector since it can
respond to a target only while the searchcoil is being moved over the Target.
16
continue
side-to-side pat-
for-
COIL MOVEMENT
When swinging the coil, be careful
to keep it level with the ground about
one inch from the surface. Never
swing the coil like a pendulum.
WRONG
CORRECT
Motion
Modes Only