Assembly - Titan 3000XD Owner's Manual

ASSEMBLY

Assembly is easy and requires no tools.
1
Position the lower stem (the straight tube)
with the silver button toward the back.
Using the bolt and knurled knob,
attach the search coil to the plastic
extension protruding from the
lower stem.
2
Press the button
on the upper end
of the lower stem,
and slide the lower
stem into the upper
stem.
Adjust the stem to a length
that lets you maintain a
comfortable upright posture,
with your arm relaxed at
your side. Tighten the stem
locking nut.
3
Wind the cable securely around the stem.
4
Insert the plug into the matching connector on the right underside of the
detector body.
that the key-way and pins
line up correctly.
Caution:
Do not force the plug
in. Excess force will cause
damage.
To disconnect the cable,
pull on the plug. Do not
pull on the cable.
Be sure
3