Important Safety Instructions - Panasonic NU-SC100W Operating Instructions Manual

Important Safety Instructions

Read the manual carefully and keep it
properly.
Precautions for using this product for cooking
Check whether the product is damaged.
Please inspect your oven as follows before using:
1. The oven door and the oven cavity are not damaged or
cracked. If they are damaged or cracked, do not use.
2. The oven must be grounded before use. In case of
electric leakage, the ground can provide a current loop
to avoid electric shock. The power supply plug must
be inserted into a single-phase bipolar socket with
grounding.
3. Read this manual carefully before using the appliance.
The oven can only be used for the purposes indicated in
this manual.
Prevention items
Forbidden items
1. In the event that the oven door or door seal has been
damaged, do not use the oven until a qualifi ed technician
has repaired it.
2. Do not damage the safety lock of the oven door, including
the door hinges.
3. The appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
4. Children being supervised not to play with the appliance.
5. Except for a qualifi ed technician, repair is very
dangerous. Do not attempt to disassemble, repair or
modify the oven yourself.
6. When the oven works abnormally, do not continue using it.
7. Once fi nding any crack or notch on the water tank, do
not use the product, as water leakage can lead to electric
leakage or electric shock.
8. When the socket hole gets loose or the power supply
cord or plug is damaged, do not use the product. It
must be replaced by manufacturers, its service agent or
similarly qualifi ed persons in order to avoid a hazard.
9. Do not use a wet hand to touch or insert/remove the power
supply plug; otherwise an electric shock may be caused.
10. Do not knock on parts such as the control panel,
housing, oven cavity and oven door; otherwise it may
lead to product failure.
11. Do not place the product and power supply cord in damp
places with high temperatures, e.g., near a gas stove,
electrifi ed area or sink.
12. The oven is used for household cooking only and may
not be used for laboratory tests or other commercial
purposes. Moreover, the product cannot be placed in a
cupboard for use.
13. Do not use a rough scrubbing tool or sharp metal scraper
to clean the oven door glass; otherwise the glass will be
ruptured.
14. The appliance cannot operate by connecting an external
timer or an independent remote control system.
15. Do not block the air inlet and outlet; otherwise a fi re
maybe caused. Please clean the product regularly to
prevent the air inlet and outlet from being blocked by
foreign matter and dust.
Dangerous items
1. Do not place infl ammable materials around the oven or
in the oven cavity; otherwise a fi re may be caused.
2. Upon fi nding smoke, turn off the appliance or remove the
power supply plug and make sure that the oven door is
closed to prevent spreading fi re. Press Reset, and then
remove the power supply plug or turn off the general
power switch in the room.
3. Do not use the product for purpose not mentioned in the
manual, e.g., using the product to dry articles; otherwise
a fi re may be caused.
4. If the product is not cleaned regularly, the appliance
surface will be degraded to affect the appliance service
life and dangers may occur.
F0003BM03HP_Eng_170306.indd 2
5. Avoid actions or behavior that may damage the power
supply cord and power supply plug, e.g., immersing the
power supply cord and power supply plug into water,
keeping the power supply cord at a position at a high
temperature, or forcedly bending, twisting, pressing or
binding the power supply cord. A damaged power supply
cord or plug may lead to dangers such as short circuit,
electric shock and fi re. Do not immerse the appliance in
water.
Safety precautions
1. The oven surface may become very hot during and after
use. The temperature at the housing surface, air outlet,
oven door and oven cavity are relatively high. Do not
touch these parts; otherwise you maybe scalded.
2. If white smoke appears when the convection function is
used for the fi rst time, it does not indicate a fault. The
protective oil of components is volatilized to generate
white smoke due to heating.
3. The vessel and food temperatures are very high when
you stir or turn over the food during cooking or take food
out after the cooking. Please use insulated gloves or a
pot clip to prevent scalding.
4. If you need to open the oven door to stir, turn over or
rearrange food in the process of using steam, note to
keep a distance; otherwise steam may scald your face or
hands.
5. When the oven door is open, do not drag the container
along the oven door. The weight borne by the oven door
cannot exceed 3.5 kg.
Instruction Items
1. Before using vessels of different materials, fi rst confi rm
whether the vessels can withstand high temperature.
When the food is cooked in a plastic or paper package,
please watch it, as it could catch fi re.
2. Food must be placed in a proper vessel and cannot be
directly placed in the oven cavity for cooking.
3. The surface temperature and internal temperature of
the oven are very high after cooking. Do not clean it
immediately after cooking. Be sure to clean the product
after it cools down; otherwise you may be scalded.
4. Remove the power supply plug before cleaning. Do not
use a corrosive cleaning agent; otherwise it will damage
or corrode the product.
5. Clean dust from the power supply plug on a regular
basis. If the product will not be used for a long time,
remove the power supply plug. Do not pull the power
supply cord as remove the power supply plug: hold the
plug to remove it.
Power supply
The product must use a separate power supply system. A
special power supply system should be separate from other
devices for use by the oven. If such a system is not used,
the electrical appliance may blow a fuse. Fuses above 15
amperes are recommended. A high capacity fuse may not be
used in the circuit.
Grounding
The product must be grounded before use. In case of electric
leakage, the ground can provide a current loop to avoid
electric shock. The power supply plug for the product must
be inserted into a single-phase bipolar socket with grounding.
Note: Improper use of the power supply plug will lead to an
electric shock.
Electric fan
After cooking ends, the electric fan will continue running for a
certain period of time to cool down the cavity and electronic
components. This is normal.
- Eng-2 -
2017/3/6 8:50:43