FCC LABEL
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device. If
not installed and used in accordance with the
instructions, it may cause interference to radio
communications. The limits are designed to provide
reasonable protection against such interference in a
residential situation. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause interference
to radio or television reception, which can be
determined by turning the equipment on and off, the
user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna of the
affected radio or television.
•
Increase the separation between the equipment
and the affected receiver.
•
Connect equipment and the affected receiver to
power outlets on separate circuits.
•
Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by
Cochran Consulting, Inc. could void the user's
authority to operate the equipment.
This product is designed to be used only with the
®
Analyst
interface cable (RS-232) to maintain
compliance with FCC Regulations.
Protected under one or more Foreign or US patents.
Other patents may be pending.
All specifications subject to change without prior
notice. Analyst
Consulting, Inc. Energizer is a registered trademark of
the Eveready Battery Co., St. Louis MO. Copyright
2002 Cochran Consulting, Inc.
FCC ID: LYP744556-03
MODIFICATIONS
SHIELDED CABLES
PATENT INFORMATION
5,899,204
5,617,848
®
is a registered trademark of Cochran
5,794,616
5,570,688
3 0
Need help?
Do you have a question about the COMMANDER and is the answer not in the manual?
Questions and answers
My Cochran dive watch is not giving me actual depth measurements. I’m diving at altitude and the dive depths are incorrect.How do I rest it?
The Cochran COMMANDER dive watch adapts to altitude automatically as part of its environmental adaptation features. There is no specific manual reset required. However, if depth measurements appear incorrect, ensure the unit is functioning properly by installing fresh batteries and verifying its settings via the Analyst® P.C. Interface. If issues persist, contact Cochran Customer Support.
This answer is automatically generated