Table of Contents
Advertisement
•
Each Dive Beginning Statistics: 16 tissue
loading, Local Time Clock, Dive of Day, Dive
Number, Surface Time, Altitude, Time to Fly, and
Battery Voltage. Capacity is the most recent 512
dives.
•
Each Dive Ending Statistics: 16 tissue
loading, Bottom Time, Max Depth, Average
Depth, Min NDC Time, Max Deco Time, Max
Deco Ceiling, Missed Ceiling, Missed Deco
Time, Max Ascent Rate, Max A/R Time, Max A/R
Depth, Min Temperature, Average Temperature,
Maximum Temperature, Min Battery Voltage,
Time to Fly, and number of Warnings. Capacity
is the most recent 512 dives.
•
Each Dive Configuration Data: Full and
complete configuration of the system, including
User Conservatism. Capacity is the most recent
512 dives.
•
Profile Graphical Information: Depth Graph,
Ascent Rate Graph, and Temperature Graph.
Capacity is 128 hours (or 550 hours with
expanded memory upgrade) at one second
sampling.
•
Inter-Dive Events: Number of Initializations,
Unit Activation, Altitude Changes of 500 Feet,
Low Batteries, Sensor Malfunction, Analyst
interface with Dive Computer.
INTER-DIVE EVENTS: The COMMANDER stores
important information between dives, even when the
unit is not turned on. The information is stored as
acquired and is called an "Inter-Dive Event". These
events can be viewed via the Analyst
version 3.05 or higher. Some Inter-Dive events are:
•
Initialization of the unit.
•
The unit is turned on
•
Low batteries
•
Altitude Changes of over 500 feet
•
Sensor Malfunction
•
Analyst
USER CONFIGURABLE ITEMS: By using the
optional Analyst
user has the ability to change the following items:
Caution: Items that can be changed via Touch
Contact Programming may be different from the
factory settings.
Dive Time/date Stamp: This is the internal clock that
is used by the system to time-stamp each individual
dive as it occurs. Due to changes in battery voltage
and temperature, the internal Time-of-day clock may
®
P.C. Communication
®
Personal Computer Interface, the
2 2
®
®
P.C. Interface
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the COMMANDER and is the answer not in the manual?
Questions and answers
My Cochran dive watch is not giving me actual depth measurements. I’m diving at altitude and the dive depths are incorrect.How do I rest it?
The Cochran COMMANDER dive watch adapts to altitude automatically as part of its environmental adaptation features. There is no specific manual reset required. However, if depth measurements appear incorrect, ensure the unit is functioning properly by installing fresh batteries and verifying its settings via the Analyst® P.C. Interface. If issues persist, contact Cochran Customer Support.
This answer is automatically generated