Table of Contents
Advertisement
ASSISTANCE, REPAIR & MAINTENANCE: The
Cochran Commander does not require an Annual
Maintenance, but if you suspect that your
COMMANDER is not operating correctly, please
contact our Customer Support Department in the USA
for assistance at 972.644.6284 or FAX details to
972.644.6286 or E-mail details to
service@divecochran.com. Most problems can be
resolved without returning the unit. The unit may also
be returned to the place of purchase and request the
dealer to contact us. If this is not possible or is
inconvenient due to a change in location, contact us
for the name of the nearest Team Cochran Authorized
Dealer.
•
NEVER TEST OR SUBJECT THE PRODUCT TO
PRESSURIZED AIR! (Voids Warranty)
•
NEVER REMOVE THE LENS FROM THE UNIT!
(Voids Warranty)
•
ONLY USE FRESH WATER TO CLEAN UNIT!
NEVER USE SOLVENTS! (Voids Warranty)
•
DO NOT USE A SCREWDRIVER TO REMOVE
BATTERY CAP! (Voids Warranty)
•
ALWAYS KEEP FRESH ENERGIZER
BATTERIES INSTALLED!
•
LUBRICATE BATTERY ENDS WITH THIN FILM OF
SILICONE GREASE!
REPLACEMENT PARTS:
Batteries (2)
Battery Cap O-rings
Battery Cap Assembly
Pins (2) Replacement
Wrist Strap (long Gray)
Wrist Strap (long, black)
Retractor Only
Retractor with Compass
Lens Protector (Pkg. of 3)
ANALYST
The ANALYST
complete hardware/software system that uploads data
from the Cochran COMMANDER to an IBM or
compatible Personal Computer with a Windows
95/98/NT operating system. The ANALYST
Computer Interface allows the diver to retrieve dive
data, customize the dive computer and also to enter
and store information for each dive in a logbook.
®
Personal Computer Interface
®
Personal Computer Interface is a
2 9
BRAND
®
®
®
Personal
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the COMMANDER and is the answer not in the manual?
Questions and answers
My Cochran dive watch is not giving me actual depth measurements. I’m diving at altitude and the dive depths are incorrect.How do I rest it?
The Cochran COMMANDER dive watch adapts to altitude automatically as part of its environmental adaptation features. There is no specific manual reset required. However, if depth measurements appear incorrect, ensure the unit is functioning properly by installing fresh batteries and verifying its settings via the Analyst® P.C. Interface. If issues persist, contact Cochran Customer Support.
This answer is automatically generated