Table of Contents
Advertisement
PRODUCT INTRODUCTION: The COMMANDER is
quite simple to use and operate, but underneath that
simplicity lies a significant level of sophistication. To
get the safest and most effective use of this
instrument, it is important that the user fully
understand the product. Please read and understand
this entire manual and know the principles and
practices of safe diving before using this device.
This Manual is divided into the following Sections:
Section
•
Operation as an Air-only Dive Computer
•
Alarm Clock Operation
•
Touch Programming
•
Warnings
•
Configurable Items
•
Specifications and Maintenance
•
Liability, and Warranty
•
Itemized Index and Subjects
SIDE CONTACTS:
The Contacts are used to let the user command the
unit to do a number of functions, communicate with a
PC for extracting information or configuring the unit,
and determining water conductivity. When Contacts 1
& 2 are shorted, the COMMANDER can detect the
difference between wet fingers, metal objects, fresh
water, salt water, and a PC interface probe.
TURNING ON THE COMMANDER: Although the
COMMANDER automatically turns on when it is
submerged in water, it is STRONGLY recommended
that the unit be manually powered up by wetting two
fingers and simultaneously touching Contacts 1 and 2
for two seconds. This allows the diver to ensure that
the unit is operating correctly and has adequate
battery capacity prior to entry. Once activated, the
unit will remain on for 60 minutes. If a dive is not
initiated within this 60 minutes, the COMMANDER
CONTACT #3
CONTACT #2
CONTACT #1
1
Page
1
10
13
19
22
26
31
38
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the COMMANDER and is the answer not in the manual?
Questions and answers
My Cochran dive watch is not giving me actual depth measurements. I’m diving at altitude and the dive depths are incorrect.How do I rest it?
The Cochran COMMANDER dive watch adapts to altitude automatically as part of its environmental adaptation features. There is no specific manual reset required. However, if depth measurements appear incorrect, ensure the unit is functioning properly by installing fresh batteries and verifying its settings via the Analyst® P.C. Interface. If issues persist, contact Cochran Customer Support.
This answer is automatically generated