Check Out - Quickie Pulse 6BC Owner's Manual

Q UI C KIE PU LS E
S. CHECK-OUT
Once the wheelchair is assembled and adjusted, it should roll smoothly and easily. All acces-
sories should the checked to make sure they are also performing smoothly. After the wheel-
chair has been set-up, be sure that the chair performs to ytour specified operational settings.
If the chair does not perform the way you expect it to, (according to specifications), turn
your wheelchair OFF immediately and contact your authorized supplier to re-program oper-
ational settings using the RNET or VR2 operating guide.
If you have any problems, follow this Procedure:
a. Review the Set-up, Adjustment, and use section and the Operating Guide to make sure
the chair was properly prepared.
b. If your problem persists, contact your authorized supplier. If you still have a problem
after contacting your authorized supplier, contact Sunrise Medical Customer service.
See the introduction page for details of how to contact the people who can help you.
21
VIII. USE AND MAINTENANCE
119832 Rev. E