Aardvark Direct Pro Q10 Owner's Manual page 48

Q10
SOFTWARE
NEMESYS GIGASTUDIO™,
NATIVE INSTRUMENTS &
PROPELLERHEAD REASON™ QUICKSTART
NEMESYS GIGASTUDIO™:
Go to the SETTINGS menu
On the Hardware Routing Tab the hardware choice is Aardvark Pro Q10
Multichannel
Sample rate 44.1 (or whatever sample rate you prefer), and bit depth 32
You can enable as many outputs as you wish. Keep in mind, though,
that if you plan on using other software at the same time as Gigastudio,
they will not be able to use these outputs.
On the Sampler Tab the buffer is set to 1 meg. The optimal buffer size
depends a great deal on the computer you are using, though.
NATIVE INSTRUMENTS REAKTOR™, B4™, PRO52™, ETC.
For best performance, be sure that these
programs are configured to use ASIO.
For ultra low latency performance, you should
also try the "ASIO Turbo Mode" found in the
Advanced Tab of the Q10 Control Panel
PAGE
4 3
4 3
DIRECT PRO Q10
O W N E R S M A N U A L