Macintosh Os X Driver & Control Panel Installation - Aardvark Direct Pro Q10 Owner's Manual

PAGE
6
6
DIRECT PRO Q10
O W N E R S M A N U A L
Q10
SOFTWARE INSTALLATION
MAC OSX DRIVER &
CONTROL PANEL INSTALLATION
1. Once the hardware is physically
installed on your computer, plug the
computer back in and power up.
2. Put the Macintosh Driver/Control
panel CD in the CD drive. On most
machines, the contents of the CD will
automatically appear. If the CD
contents don't appear automatically, go
to Finder and have it view the contents
of the CD.
3. Double click "AARKHOST.dmg" on the
CD then double click "Q10_install.pkg"
to start the installer
4. The installer will begin with the
"Welcome to the Aardvark CoreAudio
Installer" screen. Click CONTINUE
5. Next, a "Read Me" section will
appear with information regarding the
driver you're about to install. Click
CONTINUE
6. You will then be asked to select the
destination of the software you're about
to install. Choose your main hard drive
and click CONTINUE to proceed.
7 . You will then be asked to verify that
you would like to perform a
basic installation on the destination you
just selected. Click INSTALL to continue.