Aardvark Direct Pro Q10 Owner's Manual page 40

Q10
SOFTWARE
MOTU DIGITAL PERFORMER™ &
EMAGIC LOGIC AUDIO™ QUICKSTART
MOTU DIGITAL PERFORMER (Mac only):
First, be sure you have copied the Aardvark ASIO driver into Digital
Performer's ASIO DRIVERS folder. If you are unsure how to do this, please
refer to step 10 of the Mac installation instructions on page ((())).
In Digital Performer, go to BASICS | AUDIO SYSTEM, and make sure
MOTU AUDIO SYSTEM is selected.
Once you have verified this, go to BASICS | CONFIGURE AUDIO
SYSTEM | CONFIGURE HARDWARE DRIVER. In the first dropdown menu,
choose ASIO. In the second dropdown menu, choose Aardvark as your ASIO
driver.
Please note: If Aardvark is not listed as an available driver, you probably
need to copy the Aardvark ASIO driver to Digital Performer's ASIO DRIVERS
folder.
"Sample rate" can be set to any supported rate you plan to work with. Keep
"Clock Source" set to "Internal" and do not enable the "Override internal buffer
size" option.
EMAGIC LOGIC AUDIO (mac only):
Go to AUDIO | AUDIO HARDWARE AND DRIVERS
ASIO should be the only driver type with a checkmark in it. Use the
dropdown menu to choose AARDVARK ASIO DRIVER
Please note: If Aardvark is not listed as an available driver, you probably
need to copy the Aardvark ASIO driver to Logic's ASIO DRIVERS folder.
PAGE
3 5
3 5
DIRECT PRO Q10
O W N E R S M A N U A L