BODY BIKE SMART+ Do's & Don'ts

Hide thumbs Also See for SMART+:

Table of Contents

Download this manual

DO'S & DON'TS

TROUBLE

SHOOTING

Table of Contents

Need help?

Do you have a question about the SMART+ and is the answer not in the manual?

Page 1 DO’S & DON’TS TROUBLE SHOOTING...
Page 2 DO’S & DON’TS GENERAL INFORMATION Before beginning any exercise, please consult your physician Wipe off the cycle after EVERY use. If necessary, use water in a spray bottle and a tissue with some washing-up liquid. NEVER use alcohol or chemicals to clean the cycle ALWAYS release tension after use The rubber feet should always be adjusted to ensure that the cycle is in level DO NOT perform stretch exercises on the cycle, pedals or up against the cycle...
Page 3: Troubleshooting
• If the light indicator is blinking blue it is ready to connect. Make sure the Bluetooth on your device is open. Restart the BODY BIKE app. Connection via ANT+ demands ANT+ enabled device. • If the light indicator on the charger unit is solid blue, a device is already connected via Bluetooth. It is only possible to connect one device to the cycle via Bluetooth at a time.
Page 4 TROUBLESHOOTING No charging • Make sure the charger cable it firmly connected to both the control box and the device you wish to charge. • Pedal at least 70 RPM. Please note: A tablet with a totally flat battery will immediately consume so much power that charging will shut down in order to keep power for the control box and data transmission.