1. Manuals
  2. Brands
  3. BODY BIKE Manuals
  4. Exercise Bike
  5. Indoor Cycle
  6. Instructions for use manual

BODY BIKE Indoor Cycle Instructions For Use Manual

Hide thumbs Also See for Indoor Cycle:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Instructions
for your
BODY BIKE Indoor Cycle
BODY BIKE Classic Supreme
BODY
BIKE
®
I N DOOR C Y C L E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Indoor Cycle and is the answer not in the manual?

Questions and answers

Related Manuals for BODY BIKE Indoor Cycle

Summary of Contents for BODY BIKE Indoor Cycle

  • Page 1 Instructions for your BODY BIKE Indoor Cycle BODY BIKE Classic Supreme BODY BIKE ® I N DOOR C Y C L E...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS EQUIPMENT REQUIRED Equipment required Unpacking Adjustment handle Introduction Drill bit 5mm Allen Wrench Drill Screwdriver Specifi cations Steel brush General information Grease Warranty Bottom frame Brush 13 mm wrench Assembly Unpacking Saddle Brake block Bottom frame 14 mm wrench A coin Handlebar 8 mm wrench...

  • Page 3: Introduction

    I N D O OR C Y C L E This manual provides information on the assembly and maintenance of the BODY BIKE indoor cycle. The manual is intended for the owners and service people responsible for cleaning and maintenance.
  • Page 4 SPECIFICATIONS Length, Width, Height: Maximum user weight Manufacturer: Assembled size: 150 kg (Please note that the max. BODY BIKE International A/S 105cm, 60cm, 100cm pedal load may be lower) Pier 6 Nord Packed size (5 cycles): DK-9900 Frederikshavn 120cm, 80cm, 114cm...

  • Page 5: General Information

    DO NOT perform stretch exercises on The warranty only applies to cycles equipped the cycle, pedals or up against the cycle, with original BODY BIKE spare parts. All except against the strech area at the rear warranties are cancelled if the cycle has been end of the cycle modifi...
  • Page 6 ASSEMBLY Unpacking Bottom frame Handlebar Bottle holder Saddle Pedals...

  • Page 7: Unpacking

    BODY BIKE ® I N D O OR C Y C L E UNPACKING THE PALLET 1) Begin by opening the top of the box. 2) Remove all the unmounted parts. 3) Flatten the box on the fl oor next to the pallet.

  • Page 8: Bottom Frame

    LIFT BOTTOM FRAME A fi xing tool can be bought at BODY BIKE International A/S to ease the mounting of the bottom frame. 1. Arrange the bottom frames parallel on the fl oor next to the cycle with the correct mounting distance between them, see fi...

  • Page 9: Handlebar

    BODY BIKE ® I N D O OR C Y C L E Figure 6 Figure 7 Figure 8 HANDLEBAR SADDLE on the brake, so the pedalarm is unable to rotate, see fi gure 7 1: Place the handlebar on top 1: Place the saddle in the track of the front post.

  • Page 10: Maintenance

    MAINTENANCE Cleaning (After every use) Sidewards play in posts (When necessary) Cleaning the posts (Every other week) Adjustment handles (Min. every 3 months) 13 Replacing the brake block (When necessary) Poly-V belt (When necessary) Removal of side covers (When necessary)

  • Page 11: Cleaning

    BODY BIKE ® I N D O OR C Y C L E CLEANING After each workout, wipe the cycle down with tissue paper. If the cycle is covered in sweat or dirt, use water in a spray bottle and if necessary a tissue with some washing-up liquid.

  • Page 12: Sidewards Play In Posts

    32 MM NUT HANDLE BRASS PISTON Figure 10 Figure 11 SIDEWARDS PLAY IN POSTS Front post 3: Remount the seat post 1: Remove the right service hatch by loosen- ing the locks with the coin, see fi gure 14. 4: Carefully lift up the top cover as shown on fi...

  • Page 13: Cleaning The Posts

    BODY BIKE ® I N D O OR C Y C L E SCREW HANDLEGRIP WASHER SPRING MAIN SCREW Figure 12 Figure 13 CLEANING THE POSTS ADJUSTMENT HANDLE Every other week the posts need cleaning to Every 3 months the handles need cleaning protect them from sweat etc.

  • Page 14: Replacing The Brake Block

    3: Lubricate the internal parts with REPLACING THE BRAKE BLOCK grease before reassembling the handle. The BODY BIKE Synthetic Brake Pad has Remember to lubricate inside the an expected durability of a minimum of handlegrip as well. 1500 hours, so eventually the brake pad will be worn.
  • Page 15 BODY BIKE ® I N D O OR C Y C L E 2: Release tension completely on the brake. REMOVE 3: Remove the two screws holding the brake block to the frame by using an 8 mm wrench, see fi gure 15 4: Take the new brake block and fasten it to the frame by tightening the screw closest to the brake Figure 15...

  • Page 16: Poly-V Belt

    13 mm wrench. 2: Loosen the bolts (1) on both BODY BIKE Distributor. sides of the cycle with a 19 mm 4: Screw the bolts down in wrench, see fi gure 18.

  • Page 17: Trouble-Shooter

    BODY BIKE ® I N D O OR C Y C L E TROUBLE SHOOTER How to keep the cycles in good condition? It is a good idea to place a board at the exit of the spinning room displaying all cycle numbers. Here people can write possible problems or concerns arisen during the exercise.
  • Page 18 CLASSIC SUPREME FIRST AID KIT Including a range of spare parts for easy replacement of wear and tear parts. Item number: 97200010...
  • Page 19 BODY BIKE ® I N D O OR C Y C L E CLASSIC SUPREME TOOL BOX Handy tool box containing a wide range of tools for maintenance purposes, e.g. the three spanners included in the starter set. Item number: 92300020...
  • Page 20 BODY BIKE ® I N DOOR C Y C L E Edition 3 BODY BIKE International A/S Pier 6 Nord DK-9900 Frederikshavn Denmark Tlf: +45 9843 9696 Fax: +45 9843 9688 www.body-bike.com...

Table of Contents