Maintenance - DeWalt DC810 Instruction Manual

Heavy-duty 36v 1/2" (13 mm), 28v 1/2" (13 mm), 28v 1/4" (6.35 mm) cordless impact wrench
Hide thumbs Also See for DC810:
Table of Contents

Advertisement

Available languages

Available languages

Material:
The type of material and surface finish of the material
will affect fastening torque.
• Fastening Time: Longer fastening time results in increased
fastening torque. Using a longer fastening time than recom-
mended
could
cause the fasteners to be overstressed,
stripped or damaged.
Your impact tool generates the following output torque:
Cat #
Ft.-Lbs. In.-Lbs. Nm
DCS00
325
3900
440
DC810
160
1920
215
DC815
117
1400
160
MAINTENANCE
J_WARNING:
To reduce
the
risk of injury,
turn
unit off
and disconnect
it from power
source before installing and
removing
accessories,
before
adjusting
or when
making
repairs. An accidental start-up can cause injury.
Cleaning
J_, W ARNING: Blow dirt and dust out of all air vents with clean, dry air
at least once a week. To minimize the risk of eye injury, always wear
ANSI Z87.1 approved eye protection when performing this.
Jl, WARNING:
Never use solvents or other harsh chemicals
for
cleaning the non-metallic parts of the tool These chemicals may
weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get
inside the tool," never immerse any part of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect the charger from the AC
outlet before cleaning. Dirt and grease may be removed from the
exterior of the charger using a cloth or soft non-metallic brush. Do not
use water or any cleaning solutions.
Accessories
_WARNING:
Since accessories,
other than those
offered by
DEWALT, have not been tested with this product,
use of such
accessories with this tool could be hazardous. To reduce the risk of
injury, only DEWALT recommended accessories should be used with
this product.
Recommended
accessories for use with your tool are available at
extra cost from your local service center. If you need any assistance
in locating any accessory, please contact DEWALT Industrial Tool Co.,
701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT
(1-800-433-9258) or visit our website: www.dewalt.com.
AWARNING:
Use only impact accessories. Non-impact accessories
may break and cause a hazardous condition. Inspect accessories
prior to use to ensure that they contain no cracks.
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed
by a DEWALT factory service center, a DEWALT
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register
Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION
OF OWNERSHIP:
In case of an insurance
loss, such as fire, flood or theft, your registration of ownership will
serve as your proof of purchase.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc800Dc815

Table of Contents