Processor Type Read - Mitsubishi Electric MELSEC iQ-F Series FX5 User Manual

Processor type read

This command reads the processor module name code (processor type) of the access destination module.
Request data
■When communicating data in ASCII code
4 bytes 4 bytes
Subcommand
0 1 0 1
30H 31H 30H 31H 00H 00H 00H 00H
■When communicating data in binary code
2 bytes 2 bytes
Subcommand
01H 01H 00H 00H
Response data
■When communicating data in ASCII code
■When communicating data in binary code
■Model
The characters of the module model are stored for 16 characters from the upper byte.
If the model to be read is less than 16 characters, space (20H) is stored for the remaining characters. Even when
communicating data in binary code, the module model is stored in ASCII code.
■Model code
The following model codes will be stored.
When communicating in binary code, the data is stored in order from the lower byte to the upper byte.
Model
FX5U-32MR/ES
FX5U-64MR/ES
FX5U-80MR/ES
FX5U-32MT/ES
FX5U-64MT/ES
FX5U-80MT/ES
FX5U-32MT/ESS
FX5U-64MT/ESS
FX5U-80MT/ESS
FX5UC-32MT/D
FX5UC-32MT/DSS
16 bytes
Model
16 bytes
Model
4 bytes
Model
code
2 bytes
Model
code
Model code (hexadecimal)
4A21H
4A23H
4A24H
4A29H
4A2BH
4A2CH
4A31H
4A33H
4A34H
4A91H
4A99H
4
4 COMMANDS
85
4.3 Remote Control