Database Programming - Tadiran Telecom Coral IPx Office Installation And Hardware Reference Manual

2
9-34
Shared Service Cards
0 0

Database Programming

...................................................................................................
The 3-WAY circuit requires some database settings. Consult the Program Interface
(PI) and Database Reference Manual for instructions on the database programming
required for C3WAY.
The following parameters must be set for 3-way conference and Silent Monitoring.
Sizes TAB (Route: SYSGEN)
RESOURCES
Class of Service (Route: COS,0)
BROKER/CONSULT/3-WAY/ALL
SILENT_MONITOR
Numbering Plan (Route: NPL,0)
SILENT_MONITOR - field 9, index 171
URC Feature Authorization (Route: FEAT,1)
URC 3WAY
URC Configuration (Route: CDB,11,1)
3WAY - Defines the maximum number of 3-way Conference bridge
resources to be enabled by the system URC cards. Each 3-way conference
circuit requires 4 card resource points (therefore, eight 3-way circuits
require 32 resource points).
When the 3-way conference exists and is initialized, the PI displays the following:
Card List (Route: CLIS)
Card type (see
Table 9-3 on page 9-7)
RMI-F or MR in the P_TYPE field of Shelf #1, Slot #6.
URC2 in the P_TYPE field of Shelf #1, Slot #7.
Port List (Route: PLIS,0)
Port type must show:
C3WAY in the TYPE field of Shelf #1, Slot #7, Ckt #56-79(max.).
Table 9-16 URC Three-Way Conference (C3WAY) PI Configuration, page
See
Refer to Program Interface (PI) and Database Reference Manual, Chapter 6,
System Port List for more details.
must show:
Coral IPx Office Installation Manual
9-28.