Table 5-2 Station Interface Wire Pair Requirements - Tadiran Telecom Coral IPx Office Installation And Hardware Reference Manual

Table 5-2 Station
Interface Wire Pair
Requirements
Never insert "4/8/20S Office" and "4/8/16/24SA Office" cards in the same Coral
Never exceed the number of POTs and FlexSets stations listed in
5-8
External Connections
To prevent a potential shock hazard to station users and damage to the system, make
sure that station circuits extended over cables that exit the building are adequately
protected from lightning and surge currents. See
protective device specifications.
Station Interface Supported Station Equipment
Card Type
4/8/16/24SA Office, Standard Single-Line Telephone (2500 SLT) Sets,
4SA+8Fx Office,
SLT Sets with Message Waiting Lamp
4SA+16Fx Office,
8SA+8Fx Office,
8SA+16Fx Office
4/8/20S Office, Standard Single-Line Telephone (500/2500 SLT)
4S+8Fx Office, Sets,
4S+16Fx Office,
SLT Sets with Message Waiting Lamp
8S+8Fx Office,
8S+16Fx Office
8/16/24SFT Office, FlexSet, APDL, CPA, GKT, APA, PEX, PEX+APA
4S+8Fx Office,
4S+16Fx Office,
FlexSet 280/281 series with PEX / APA,
8S+8Fx Office,
FlexAPDL,
8S+16Fx Office
CPA;
For optional external power via line connector pins
2 and 5, see
Installation Manual
IP endpoints, LAN connection
FlexSet-IP 280S,
Coral Sentinel
with power over LAN type-A
T200 series
Protection Devices, page 5-13
Coral Terminal Equipment
.
IPx
unit.
Table 10-5 Table 10-6
and
Coral IPx Office Installation Manual
for
Pairs
Required
1
1
1
2
2
4
.