Page 2
Connecting to the Phone 1. Attach the stand, as shown below: 2. Connect the EXP20 and the phone using the supplied screws and connecting sheet, as shown below: Your phone and the expansion module will be connected as shown below:...
Page 3
Your phone and the two expansion modules will be connected as shown below: Note: The T29G/T27P IP phone can support three expansion modules at most. But if you use more than two expansion modules, you need to connect an additional power adapter to anyone of the expansion modules.
Need help?
Do you have a question about the EXP20 and is the answer not in the manual?
Questions and answers