Keyless Entry System - Subaru LEGACY 2002 Quick Reference Index

Security and Locks

3. Keyless Entry System

A: CONSTRUCTION
! The keyless entry system consists of a transmitter, keyless entry control module (with a built-in
antenna), door lock actuators, door switches, hazard warning lights and interior light.
! The keyless entry system operates on a radio frequency, so its transmitter can be used in almost
all directions relative to the vehicle.
B: FUNCTION
1. DOOR LOCKING
1) Push the transmitter's LOCK button once.
2) All doors are locked.
3) Check that the hazard warning lights flash once.
2. DOOR UNLOCKING
1) Push the transmitter's UNLOCK button once.
2) All doors are unlocked, the ignition switch illumination turns ON and the interior light turns ON
(when the interior light switch is set at the middle position).
NOTE:
The interior light and ignition switch illumination illuminates for 15 seconds, then gradually dim and
go out in 5 seconds.
If the key is inserted in the ignition switch before the interior light and ignition switch illumination
go out, these lights will dim gradually and go out in 5 seconds.
If any door is opened and then closed during the 15-second period, these lights will illuminate for
3 seconds, then dim gradually and go out in 5 seconds.
If the transmitter's LOCK button is pushed during the 15-second period, these lights will go out
immediately.
3) Check that the hazard warning lights flash twice.
KEYLESS ENTRY SYSTEM
SL-4