5. Oil Pan and Oil Strainer
!
The oil pan consists of an upper oil pan (aluminum die-casting) and a lower oil pan (formed steel
plate). The upper oil pan has a baffle plate molded in it to improve stability of the oil level.
!
The oil strainer has a stay whose end is attached to the upper oil pan. The strainer's pipe is con-
nected to the oil pump using an O-ring. The strainer is located close to the bottom at the center of
the oil pan where the oil level changes the least.
(1) Upper oil pan
(2) Strainer
(3) Lower oil pan
OIL PAN AND OIL STRAINER
(4)
(2)
LU-7
(1)
(5)
(3)
(4) O-ring
(5) Magnet
Lubrication
B2H3890A