Subaru LEGACY 2002 Quick Reference Index page 515

Hide thumbs Also See for LEGACY 2002:
Table of Contents

Advertisement

1. AUTOMATIC CONTROL OPERATION
!
AUTO switch: When this switch is pressed (ON), the air outlet selection, blower fan speed, air
temperature, fresh/recirculation switching, and compressor operation are automatically controlled.
When the AUTO switch is pressed second time, the compressor operates in the ECON mode. In
the ECON mode, the ECM controls compressor operation based on inputs from the intake air tem-
perature sensor. Compressor operating time in the ECON mode is shorter than in the AUTO mode.
!
Temperature set switch: A desired cabin temperature can be set in 0.5°C increments.
!
OFF/Bright switch: When this switch is pressed, the blower fan and compressor stop and all the
indicators go out.
Setting the light switch to the "
panel to dim. When traveling with the lights on in goomy daylight or in twilight, press the OFF
switch for 1 second or longer if you feel it is too hard to identify the icons clearly. The brightness
comes back to normal.
2. MANUAL CONTROL OPERATION
!
A/C switch: The air-conditioner turns on when this switch is pressed first and turns off when it is
pressed second time.
!
Blower fan switch: Fan speed changes in the order of Lo, M1, M2 and Hi, every time it is pressed.
!
Ambient temperature display switch: When this switch is pressed momentarily, the ambient tem-
perature is indicated on the display for 5 seconds. When this switch is depressed for more than 1
seconds, the ambient temperature is continuously indicated.
Defroster switch: Air is directed to the windshield for defrosting when this switch is pressed.
!
Rear deffoger switch: Pressing this switch causes the rear deffoger to operate for 15 minutes.
!
!
Fresh/Recirc switch: Every time this switch is pressed, switching takes place between outside
air introduction and inside air recirculation alternately.
!
Mode selector switch: Pressing this switch changes the outlets to which the air is directed in the
order shown below.
AUTOMATIC AIR CONDITIONING
" or "
" position causes the illuminating icons on the display
AC-43
HVAC System (Heater, Ventilator and A/C)
B4H1314B

Advertisement

Table of Contents
loading

Table of Contents