Subaru LEGACY 2002 Quick Reference Index page 377

B: REAR DRIVE SHAFT
! A double offset joint (DOJ) is used on the differential side of each rear drive shaft. The DOJ can
be disassembled for maintenance. It provides a maximum operating angle of 23° and can be
moved in the axial directions.
! A bell joint (BJ) is used on the wheel side of each rear drive shaft. Its maximum operating angle
is 42°.
(3)
(1) Double offset joint (DOJ)
(2) Bell joint (BJ)
(3) Differential side
(4) Wheel side
REAR AXLE
(1)
DS-7
Drive Shaft System
(2)
(4)
B4H2194B