Subaru LEGACY 2002 Quick Reference Index page 558

Wiper and Washer Systems
2. Rear Wiper and Washer
A: DESCRIPTION
1. REAR WIPER
1) The rear wiper operates intermittently at a 10-second interval.
2) The rear wiper operates over a 168-degree angle.
3) The wiper blade is attached to the arm by means of a U-hook joint in the same way as with the
front wipers.
2. REAR WASHER SYSTEM
1) The same washer tank is shared by the front and rear washer systems.
2) The washer motor and pump unit is installed at the bottom of the washer tank, adjacent to the
front washer's unit.
3) The washer nozzle is installed on the upper portion of rear gate panel. The nozzle has two
spray holes.
4) The washer nozzle is provided with a check valve which is located just below it.
3. SPECIFICATIONS
Wiper Motor Rated voltage
No-load current
Speed [at 0.5 N·m (5 kg-cm, 4.3 in-lb)]
Locked rotor current
Wiper Blade Length
REAR WIPER AND WASHER
12 V
2 A or less
30 ± 5 rpm or more
13 A or less
375 mm (14.76 in)
WW-4
B6H1165