Table of Contents
Advertisement
Rear Panel
1
Antenna connector
2
WAN
3
LAN 1- 4
4
USB 2.0
5
Console
6
5V
2 A
7
Restart / Reset
Right-Side Panel
There is a hole on the right side for Kensington lock. If it is not used, admin can fill the
hole with the rubber plug given.
Copyright © 4IPNET, INC. All rights reserved.
Reverse SMA connectors for attaching antenna as shown in figure 2.
For attaching an Ethernet cable to an uplink service.
Attach Ethernet cables here for connecting to the wired local network.
Reserved for future use.
Attach the serial cable here to access console interface.
Attach the power adapter here.
Press once to restart the system; Press and hold for more than 5 seconds to
reset to factory default.
HSG260 Wireless Hotspot Gateway ENGLISH
3
Quick Installation Guide
Advertisement
Table of Contents
