22
Fabric and connection parameter settings
Set each array port to FABRIC ON or OFF with connections of
POINT-TO-POINT or FC-AL as shown in the following table and figures.
For detailed topology information, refer to the HP StorageWorks SAN
Design Reference Guide on the
Fabric
Connection
Parameter
Parameter
ON
FC-AL
ON
Point-to-Point
OFF
FC-AL
OFF
Point-to-Point
HP StorageWorks Disk Array XP Operating System Configuration Guide: OpenVMS
hp.com
website. .
Provides
Not supported by Open VMS
N-port (fabric port, direct connect)
Not supported by Open VMS
Not supported