Command View, or Command View XP Advanced Edition to designate at least one LDEV
as a command device. Refer to the applicable user's guide for information about how to
designate a command device.
Installation procedures
Perform these actions to install and configure the disk array:
1. Install and configure the disk array
•
Setting the host mode for the disk array ports
•
Setting the System Option Modes
•
Configuring the Fibre Channel ports
2. Install and configure the host
•
Loading the OS and software
Installing and configuring the HBAs
•
•
Verifying the HBA configuration
•
Clustering and fabric zoning
•
Fabric zoning and LUN security for multiple operating systems
3. Connect the disk array
•
Defining the paths
•
Adding the new device paths to the system
•
Verifying host recognition of disk array devices
4. Configure disk array devices
•
Partitioning and labeling the devices
Creating the file systems
•
5. Configure for use with Veritas Volume Manager
12
Installation