Cabling The Serial Interface To A Pc; Figure 5-15: Rs-232 Cable Adapter; Figure 5-16: Cabling Serial Port; Table 5-4: Rj-45 To Db-9 Serial Cable Connector Pinouts - AudioCodes mediant 500l msbr Installation Manual

Hardware Installation Manual
5.5

Cabling the Serial Interface to a PC

The device provides an RS-232 serial interface port on its rear panel. The RS-232 interface
port is used to access the device's command line interface (CLI). An RJ-45 to DB-9 serial
cable adapter is supplied for serial cabling:

Table 5-4: RJ-45 to DB-9 Serial Cable Connector Pinouts


To connect the device's serial interface port to a PC:
1. Connect the RJ-45 connector at the end of the cable to the device's serial port, located
on the rear panel and labeled CONSOLE.
2. Connect the 9-pin DB connector at the other end of the cable to the COM RS-232
communication port on your computer.
MSBR Series

Figure 5-15: RS-232 Cable Adapter

RJ-45
1
2
3
4
5
6
7
8

Figure 5-16: Cabling Serial Port

37
5. Cabling the Device
DB-9 Female
8
6
2
5
5
3
4
7
Mediant 500L MSBR