Serial Parameters - AudioCodes Mediant 500 MSBR User Manual

Default Inform Interval
inform-interval
[TR069PeriodicInformInte
rval]
tr069-cwmp-wait-
interval
[TR069RetryinimumWaitI
nterval]
debug-mode
[TR069DebugMode]
conf-change-
notification
[Tr069ConfChangeNotific
ation]
VRF Name
vrf-name
[TR069VrfName]
Data Model
data-model
[Tr069DataModel]
Verify Certificate
verify-certificate
[Tr069VerifyCertificate]
Verify Common Name
verify-common-name
[Tr069VerifyCommonNam
e]
TLS Context
tls-context
[Tr069TLSContext]

74.1.7 Serial Parameters

The serial interface parameters are described in the table below.
Parameter
User's Manual
Defines the inform interval (in seconds) at which the device periodically
communicates with the ACS. Each time the device communicates with
the ACS, the ACS sends a response indicating whether or not the ACS
has an action to execute on the device.
The valid value is 0 to 4294967295. The default is 60.
Defines the minimum interval (in seconds) that the device waits before
attempting again to communicate with the ACS after the previous
communication attempt failure.
The valid value is 1 to 65535. The default is 5.
Defines the debug mode level, which is the type of messages sent to
the Syslog server.
The valid value is between 0 and 3, where 0 (default) means no debug
messages are sent and 3 is all message types are sent.
Enables the device to notify the TR-069 ACS of device configuration
changes. The device sends this as a TR-069 Value Change Event
when the management user logs out of the management interface
(Web or CLI). The parameter is applicable to Data Model
InternetGatewayDevice (TR-098).

[0] = (Default) Disable

[1] = Enable
Assigns a VRF to the TR-069 application.
The default is "main_vrf".
Defines the TR-069 Data Model.

[0] Device = (Default) TR-181

[1] InternetGatewayDevice = TR-098
Enables verification of the certificate during the TR-069 connection.

[0] Disable

[1] Enable (default)
Enables verification of the Common Name (CN) field (DNS hostname
matches the certificate subject common name) during the TR-069
connection.

[0] Disable

[1] Enable (default)
Assigns a TLS Context for TR-069 management.
By default, TLS Context ID 0 is used.
Table 74-7: Serial Parameters
996
Description
Document #: LTRT-10375
Mediant 500 MSBR