Connecting The Serial Interface To A Pc; Figure 6-18: Rs-232 Cable Adapter; Figure 6-19: Cabling Serial Port; Table 6-4: Rj-45 To Db-9 Serial Cable Connector Pinouts - AudioCodes Mediant 500 MSBR Hardware Installation Manual

Hardware Installation Manual
6.7

Connecting the Serial Interface to a PC

The device provides an RS-232 serial interface port on its front panel. The serial cable
adapter used for connecting the RS-232 interface is shown below:

Table 6-4: RJ-45 to DB-9 Serial Cable Connector Pinouts


To connect the device's serial interface port to a PC:
1. Connect the end of the cable providing the RJ-45 connector to the device's serial port
located on the front panel, labeled CONSOLE.
2. Connect the other end of the cable providing the 9-pin DB connector to the COM RS-
232 communication port on your computer.
Version 6.8

Figure 6-18: RS-232 Cable Adapter

RJ-45
1
2
3
4
5
6
7
8

Figure 6-19: Cabling Serial Port

39
6. Cabling the Device
DB-9 Female
8
6
2
5
5
3
4
7
Mediant 500 MSBR