Table; Asr 9006 Router Physical Specifications; Asr 9010 Ac Electrical Specifications - Cisco ASR 9000 series Reference Manual

Table A-2
Table A-2
Description
Chassis height
Chassis width
Chassis depth
Chassis weight
Chassis only
•
Chassis: fully configured
•
using all card slots and three
power modules
1. Chassis only does not include cards, power modules, fan trays, filter or chassis accessories.
Table A-3
Table A-3
Description
Total AC input power
Rated input voltage
Rated input line frequency
Input current rating
Source AC service
requirement
Redundancy
1. For each AC power supply module.
Be sure that the chassis configuration complies with the required power budgets. Failure to properly
Caution
verify the configuration may result in an unpredictable state if one of the power units fails. Contact your
local sales representative for assistance.
Cisco ASR 9000 Aggregation Services Router Overview and Reference Guide
A-2
D R A F T — C I S C O C O N F I D E N T I A L
lists the physical specifications for the Cisco ASR 9006 Router.

ASR 9006 Router Physical Specifications

Value
17.50 in. (44.45 cm)
17.50 in. (44.45 cm)
19.0 in. (48.3 cm) including chassis
rack-mount flanges and front door width
22.0 in. (55.9 cm)
28.65 in (72.72 cm) including cable
management system and front cover
1
87.5 pounds (39.69 kg)
230 pounds (104.33 kg)
lists the AC electrical specifications for the Cicso ASR 9010 Router

ASR 9010 AC Electrical Specifications

Value
3000 VA (volt-amps) per AC power supply
(up to 6 AC power supply modules per system)
1
200–240 VAC nominal (range: 180 to 264 VAC)
220–240 VAC (UK)
1
50/60 Hz nominal (range: 47 to 63 Hz)
50/60 Hz (UK)
1
15 A maximum at 200 VAC
13 A maximum at 220 to 240 VRMS (UK)
20 A North America; 16 A international;
1
13 A UK
At least four AC power supply modules (two per
power shelf) are required for 2N redundancy for a
fully-configured system.
Appendix A Technical Specifications
OL-17501-01