Rack-Mounting Considerations; Figure 1-4 Asr 9006 Major Chassis Components - Cisco ASR 9000 series Reference Manual

Chapter 1 Overview and Physical Description
Figure 1-4
Fan tray door
Line card slots
Power modules

Rack-Mounting Considerations

The chassis width of both Cisco ASR 9000 Series Routers fits into the following racks:
•
•
•
The Cisco ASR 9010 Router chassis height is 36.75 inches (93.35 cm) or 21 RU (rack units) which
includes a rack/shelf mounting option. Two chassis fits into a commonly used 42RU rack, and therefore
will fit into an ETSI 45RU rack with a height of 78.74 inches (200.00 cm).
The Cisco ASR 9006 Router chassis height is 17.50 inches (44.45 cm) or 10 RU (rack units) which
includes a rack/shelf mounting option. Four chassis fits into a commonly used 42RU rack, and therefore
will fit into an ETSI 45RU rack with a height of 78.74 inches (200.00 cm).
The chassis depth for both Cisco ASR 9000 Series Routers fits into a 31.50 inch (80.00 cm) deep EIA
rack or an equivalent 80.00 cm deep ETSI rack. This space includes cable management space front and
rear. The chassis has fixed rack mount rails that are set back 5.00 inches (12.7 cm), including front cable
management space.
Racks and cabinets will require adjustable front rails if the rack/cabinet doors must be able to close with
Note
the chassis installed.
Figure 1-5
Figure 1-6
OL-17501-01
D R A F T — C I S C O C O N F I D E N T I A L
ASR 9006 Major Chassis Components
RSP slots
Power tray
Telco racks with a rail-to-rail dimension of 17.50 inches (44.54 cm) for the Cisco ASR 9010 Router
or 17.75 inches (45.09 cm) for the Cisco ASR 9006 Router.
EIA racks 19 inches (48.26 cm) wide
Adaptable to 23 inches (58.42 cm) to fit into ETSI racks 23.62 inches (60.00 cm) wide
shows the top-down view dimensions of the Cisco ASR 9010 Router.
shows the top-down view dimensions of the Cisco ASR 9006 Router.
Cisco ASR 9000 Aggregation Services Router Overview and Reference Guide
Rack-Mounting Considerations
Rack mount bracket
Air inlet
1-5