Table of Contents
Advertisement
7-4 Set beeper sound ON/OFF
When the lower display show " BEEP "
1) Use the "
▲
( 3-6, Fig. 1 ) to select the upper text to " YES " or
" NO ".
YES - Meter's beep sound will be ON with default.
NO - Meter's beep sound will be OFF with default.
2) After select the upper text to " YES " or " NO ", press the
" ENTER Button " ( 3-7, Fig. 1 ) will save the setting
function with default.
Remark :
After execute the datalogger function, the buzzer sound
will off automatically to prevent any interference of
the measurement.
7-5 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the lower display show " DEC "
1) Use the "
▲
( 3-6, Fig. 1 ) to select the upper text to " USA " or
" EURO ".
USA - Use " . " as the Decimal point with default.
EURO - Use " , " as the Decimal point with default.
Button " ( 3-3, Fig. 1 ) or "
Button " ( 3-3, Fig. 1 ) or "
Button "
▼
Button "
▼
Advertisement
Table of Contents
