Hilti TE 50 Operating Instructions Manual page 8

Chuck
@
Function selector switch
;
Control switch
=
Supply cord
%
Side handle
&
3.2 Intended use
The product described is an electrically-powered combihammer with pneumatic hammering mechanism. It
is designed for drilling in concrete, masonry, wood and metal. The product can also be used for light to
medium-duty chiseling on masonry and surface finishing work on concrete.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Active Vibration Reduction (AVR)
TE 50-AVR
This product is equipped with an Active Vibration Reduction (AVR) system, which reduces vibration
significantly.
3.4 Quick-release chuck (accessory)
The quick-release chuck is suitable for use with accessory tools with a smooth, cylindrical shank or a
hexagonal shank, e.g.:
• Drill bits for wood
• Drill bits for metal
• Mixing paddles
The quick-release chuck is fitted in the standard chuck.
3.5 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
Note
Bring the product to Hilti Service in good time. This will help to ensure that it's always ready for use.
3.6 Items supplied
Power tool, side handle, operating instructions, depth gauge, Hilti toolbox, cleaning cloth, grease.
Note
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com.
4 Technical data
4.1 Combihammer
Note
For details of the rated voltage, current, frequency and input power, please refer to the power tool's
country-specific type identification plate.
If the tool is powered by a generator or transformer, the generator or transformer's power output must
be at least twice the rated input power shown on the rating plate of the tool. The operating voltage of
the transformer or generator must always be within +5% and -15% of the rated voltage of the tool.
6 English
Printed: 08.03.2017 | Doc-Nr: PUB / 5130201 / 000 / 03
Depth gauge
(
Service indicator
)
Theft protection indicator (optional)
+
Active Vibration Reduction AVR (only
§
TE 50-AVR)
Meaning
• End of service interval – servicing is due.
• The product is faulty. Have the product repaired
by a trained electrical specialist.