Technical Data; Restart Interlock; Items Supplied; Breaker - Hilti TE 700-AVR Operating Instructions Manual

3.6 Restart interlock

The tool doesn't restart automatically when the power returns after an
interruption in the supply. The on/off switch must first be released and then
pressed again to restart.

3.7 Items supplied

Breaker, side handle, operating instructions.
Note
You can find other system products approved for your product at your
local Hilti Center or online at: www.hilti.com

4 Technical data

4.1 Breaker

Note
For details of the rated voltage, frequency, current and input power,
please refer to the power tool's country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
Single impact energy in accordance with
EPTA procedure 05/2009
Weight in accordance with EPTA procedure 01 7.9 kg
4.2 Noise information and vibration values in accordance with
EN 60745
The sound pressure and vibration values given in these instructions have
been measured in accordance with a standardized test and may be used to
compare one electric tool with another. They may be used for a preliminary
assessment of exposure. The data given represents the main applications of
the electric tool. However, if the electric tool is used for different applications,
with different accessory tools, or is poorly maintained, the data may vary.
This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times
when the tool is switched off, or when it is running but not actually being
used for a job. This may significantly reduce exposure over the total working
period. Identify additional safety measures to protect the operator from the
effects of noise and/or vibration, for example: maintenance of the electric tool
and the accessories, keeping the hands warm, organization of work patterns.
Printed: 02.02.2017 | Doc-Nr: PUB / 5270002 / 000 / 01
11.5 J
English 11