Intended Use; Active Vibration Reduction (Avr); Service Indicator; Power Level Indicator - Hilti TE 700-AVR Operating Instructions Manual

Chuck
@
Function selector switch
;
Power level selection switch
=
On/off switch
%
Grip
&
Indicators
(
Supply cord
)

3.2 Intended use

The product described is an electrically powered breaker for medium-duty
chiseling work. It is designed for removing and breaking up concrete,
masonry and stone.
▶ Operation is permissible only when connected to a power source providing
a voltage and frequency in compliance with the information given on the
type identification plate.

3.3 Active Vibration Reduction (AVR)

The breaker is equipped with an Active Vibration Reduction (AVR) system,
which reduces vibration significantly.

3.4 Service indicator

The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
Note
Bring the product to Hilti Service in good time. This will help to ensure
that it's always ready for use.

3.5 Power level indicator

The breaker is equipped with a power level indicator LED.
Chiseling power can be reduced to approx. 70% by pressing the power
level selector switch. The power level LED then lights up, indicating reduced
power.
10 English
Printed: 02.02.2017 | Doc-Nr: PUB / 5270002 / 000 / 01
Air vents
+
Knob
§
Side handle
/
Theft protection indicator (op-
:
tional)
Service indicator
∙
Power level indicator
$
Meaning
• End of service interval – servicing
is due.
• A fault has occurred in the tool.
• The overheating prevention cut-
out has been activated.
• The voltage provided by the
electric supply is too high.