Removing The Accessory Tool; Positioning The Chisel - Hilti TE 700-AVR Operating Instructions Manual

5.4 Removing the accessory tool

DANGER
Risk of fire! Risk of contact between the hot accessory tool and highly
inflammable materials.
▶ Do not lay the hot accessory tool down on highly inflammable
materials.
WARNING
Risk of injury! The tool becomes hot as a result of use.
▶ Wear protective gloves when changing the tool.
1. Pull the chuck back.
2. Remove the accessory tool.
Note
Use only the recommended grease supplied by Hilti. Use of unsuit-
able grease may cause damage to the product.

5.5 Positioning the chisel

Note
The chisel can be adjusted to 24 different positions (in 15° increments).
This ensures that flat chisels and shaped chisels can always be set to
the optimum working position.
14 English
Printed: 02.02.2017 | Doc-Nr: PUB / 5270002 / 000 / 01