Clock Functions - Electrolux EVEM677SC User Manual

18 www.electrolux.com
Power setting
• 100 Watt

8. CLOCK FUNCTIONS

8.1 Clock functions table
Clock function
If you set the time for a clock function,
the time starts to count down after 5
seconds.
If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).
Use
Defrosting meat, fish, bread
Defrosting cheese, cream, butter
Defrosting fruit and cakes (gateaux)
Raising yeast dough
Heating up cold dishes and drinks
Minute Minder
Duration
End Time
Application
To set a countdown (max. 2 h 30 min).
This function has no effect on the opera‐
tion of the appliance.
Use to activate the function. Press
or to set the minutes and
To set the length of an operation (max. 23
h 59 min).
To set the switch-off time for a heating
function (max. 23 h 59 min).
8.2 Setting the clock functions
Before you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The appliance
deactivates automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically activate and
deactivate the appliance on
a given time later.
1. Set a heating function.
2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or
time.
4. Press to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press any symbol to stop the signal.
to start.
to set the necessary