Battery; Fuel Filter 5.20 V-Belt - Aerotech BT 400-46 Installation And Operation Maintenance

Section 5
• • • • • • • • • • • • • • • •
5.12

Battery

Use protective clothing, face shield, rubber gloves and apron
5.13 Check the specific gravity of each cell using a hydrometer. The specific gravity should be
1.250 or higher. Replace battery if any cell does not meet this condition.
5.14 Battery Removal
5.15 To remove battery, proceed as follows:
(a) Gain access to battery.
(b) Disconnect battery cables from battery. Remove negative cable first.
(c) Remove battery hold down bracket.
(d) Remove battery.
(e) Remove battery to shop for servicing.
5.16 Battery Installation
5.17 To install battery, reverse removal procedures.
5.18 Fuel Filter
5.19 The fuel filter element is non-reusable. Replace fuel filter as follows:
(a) Gain access to fuel filter assembly.
(b) Remove bolt from top of fuel filter assembly.
(c) Remove base and gasket.
(d) Remove element from base.
(e) Install new element and gasket.
(f) Install bolt securely to base through top assembly.
5.20 V-Belt
5.21 The v-belt encircles the driven coupling and fuel pump.
! Warning !
when removing battery
AEROTECH HERMAN NELSON INTERNATIONAL INC.
100 Eagle Drive, Winnipeg, Manitoba Canada R2R 1V5
Phone: 204-633-1999 (24 Hours) Fax: 204-694-1612 Email:
Check Out Our Web site
25
www.hermannelson.com New Items Added Weekly
12.18.07 REVISION 1.02
Air4ce45@aol.com