To Prevent Damage - Philips LUMEA SC1997 User Manual

Note: If you notice a skin tone has changed since the last treatment
(e.g. due to tanning), we recommend that you perform a skin test
and to wait 30 minutes before your next treatment.

To prevent damage

- Make sure that nothing obstructs the airflow through the
ventilation slots of the device.
- Never subject the device to heavy shocks and do not shake or
drop it.
- If you take the device from a very cold environment to a very warm
environment or vice versa, wait approximately 3 hours before you
use it.
- Store the device in a dust free and dry place.
- Do not expose the device to temperatures lower than 5°C or higher
than 35°C during use.
- To prevent damage, do not expose the device to direct sunlight or
UV light for several hours.
Caution
- This device is only intended for removing unwanted body hair from
areas below the cheekbone and neck. Do not use it for any other
purpose. Doing so may expose you to a hazardous situation. Men
most not use it on the face and neck including all beard-growing
areas and the whole genital area.
4222_100_4214_3_HR.indd 11
English 11
05/04/17 16:26