Ltc Levelogger Junior - Solinst Levelogger Gold User Manual

Levelogger User Guide - Software Version 3.4.0 or Higher

LTC Levelogger Junior

The LTC Levelogger Junior provides an inexpensive and convenient method
to measure level, temperature and conductivity all in one probe. The LTC
Levelogger Junior is compatible with all Levelogger Gold accessories. Solinst
recommends customers use Version 3.4.0 Software with V2.001 firmware or
higher.
LTC Levelogger Junior Technical Specifications
Level Sensor:
Ranges:
Accuracy (typical):
Resolution:
Normalization:
Temperature Sensor:
Accuracy:
Resolution:
Temp Compensation Range:
Conductivity Sensor:
Full Range:
Calibrated Range:
Accuracy:
Resolution:
Temp. Compensation Range:
Normalization:
General:
Battery Life:
Clock Accuracy:
Operating Temperature:
Memory:
Maximum Readings:
Communication:
Size:
Wetted Materials:
Sampling Mode:
Barometric Compensation:
LT Models
F30, M10
F100, M30
Piezoresistive Silicon in 316L SS
F30/M10, F100/M30
0.1% FS
0.08" (0.2 cm), 0.24" (0.6 cm)
Automatic Temp Compensation
Platinum RTD
± 0.1˚C
0.1˚C
-10˚C to 40˚C
4-Electrode Platinum
0 - 80,000 µS/cm
500 - 50,000 µS/cm
2% of reading or 20 µS/cm
1 mS
0˚C to 40˚C
Specific Conductance @ 25˚C
5 Years (5 minute sampling rate)
± 1 minute/year from 0 to 40˚C
- 20˚C to 80˚C
Non-volatile EEPROM, FRAM back-up
16,000 sets of readings
Optical Infra-Red to USB or RS232
7/8" x 7.5" (22 mm x 190 mm)
Platinum, 316 Stainless Steel, Delrin®, Viton®
Linear, (5 sec to 99 hrs) SDI-12, Real Time View
Software Wizard and Barologger Gold
Full Scale Accuracy
(FS) (Typical)
32.8 ft., 10 m ± 0.032 ft., 1.0 cm
98.4 ft., 30 m ± 0.128 ft., 1.5 cm
Resolution
0.021% FS
0.021% FS
Page 4