Usb Installation For Windows 7 - Solinst Levelogger Gold User Manual

Note:
USB driver
installation should
be automatic
when connecting a PC
Interface Cable or Optical
Reader. When connecting
a Leveloader Gold, you will
most likely have to install the
USB driver manually.
Levelogger User Guide - Software Version 3.4.0 or Higher

USB Installation for Windows 7

1) Plug the USB Device into the desired PC. The system will automatically
detect the connected unit. Windows 7 should automatically install the driver
for the device.
2) If no driver is automatically found, then the following steps should be taken.
3) Press the Windows start button to bring up the start menu, select "Control
Panel", then "Device Manager".
4) Under "Other Devices" there will be a device shown with a yellow warning
symbol. Right click on this device, and select "Update Driver Software".
5) Select "Browse my computer for driver software".
Figure 3-16 Windows 7 Device Manager
Figure 3-17 Update Driver Software
Page 17