Usb Installation For Windows 2000 - Solinst Levelogger Gold User Manual

Note:
After plugging in
the USB device,
if the Found
New Hardware Wizard does
not automatically appear,
proceed to the Manual USB
Installation instructions.
Levelogger User Guide - Software Version 3.4.0 or Higher

USB Installation for Windows 2000

1) Plug the USB device into the PC and Windows will automatically detect the
connected unit.
2) This will start the 'Found New Hardware Wizard', click next.
3) In the 'Install Hardware Device Drivers' window, select 'Search for a suitable
driver for my device (recommended)'.
4) In the 'Locate Driver File' window (Figure 3-5), select 'Specify a location'
and click 'Next'.
5) In the next window point the browser to the USB driver folder located in the
Levelogger 3_4 folder. Default Destination:
C:\Program Files\Solinst\Levelogger3_4\USB Drivers\
Win_2000_XP_Vista_7
6) Once the installation completes, a system restart may be required.
Figure 3-4 Found New Hardware Pop-up Window
Figure 3-5 Found New Hardware Wizard
Page 12