Subscribe to Our Youtube Channel
Related Manuals for Solinst AquaVent 3500
Summary of Contents for Solinst AquaVent 3500
- Page 1 Quick Start Guide 3500 AquaVent Please read this document carefully before using the AquaVent. High Quality Groundwater and Surface Water Monitoring Instrumentation...
- Page 2 Battery MODBUS or SDI-12 protocols, see separate User Guides. Compartment Getting Started 1. Download the software from: www.solinst.com/downloads and install Levelogger Software on your PC. 2. Install the Wellhead batteries. The Wellhead uses 4 user- replaceable 1.5V AA lithium batteries.
- Page 3 Note: Ensure you are using the latest software, and firmware versions for your AquaVent logger and Wellhead. Visit www.solinst.com/downloads, or use the software update feature for help. 1. Start the Levelogger Software, and select the appropriate Com Port for the connected device.
- Page 4 Click ‘OK’. Note: The default directory for downloaded and saved data is: <C:\Program Files\Solinst\Levelogger4_4\Data> Data is saved as an *.xle file. 3. To save data, click the “Save Data” icon and input the desired name for the saved file.
- Page 5 AquaVent Quick Start Guide AquaVent Ranges AquaVent Models are rated to a specific submergence depth (Table 1). Note The choice of model depends on the accuracy of the level required and the submergence depth. Most important, your selection should be The AquaVent logger can withstand over- based on the maximum anticipated water level fluctuation.
- Page 6 • Use a Solinst Model 101 or 102 Water Level Meter to take a manual depth to water measurement that will be used to verify AquaVent readings •...
- Page 7 • The USB Connector Cable allows you to connect to a field laptop for communication using Levelogger Software (see image on Page 1). • The App/DataGrabber Connector Cable allows you to connect to a Levelogger App Interface for communication using the Solinst Levelogger App, or to a DataGrabber for downloading data to a USB device. App/DataGrabber...
- Page 8 3. Make sure you are using the correct Wellhead Connector Cable to connect to the PC. • You must be using a USB Connector Cable connected to the 10-pin Solinst Protocol connection on the Wellhead. The cable and connection are colour-coded orange.
Need help?
Do you have a question about the AquaVent 3500 and is the answer not in the manual?
Questions and answers